Stuckd at connecting, HELP

[Matsjohansen]

Hi! I have some problems with my server that i am trying to get public. The server pc starts the server fine, and it's running. When im trying to connect with my gamer pc i am just stuckd on "Connecting" when im using the admin account.

The ports is forwarded and everything. Can you see trough my config files to see if you find any wrongs?

Thx



Here is my realms config

#######################################################################
# ArcEmu Realms Configuration File
# Last updated at revision rev.1875
#######################################################################

#********************************************************************************
#* How to use this config file: *
#* Config files are in a block->variable->setting format. *
#* A < signifies the opening of a block, the block name is expected after that. * 
#* After the block name, a space and then the settings sperated by = / ' '. *
#* *
#* e.g. *
#* <block setting="0" someval = "1"> *
#* *
#* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
#* of the line, or in shell format (#). *
#********************************************************************************/

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Section
#
# Address:
# The address (no port) of the server.
#
# Port:
# The port on which the logon server listens. (*** NOT 3724 ***)
#
# Name:
# Not really relavant, but name the logon.
#
# RealmCount:
# The number of realms in the next section.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<LogonServer Address = "espada-wow.servegame.com"
Port = "8093"
Name = "Default Logon"
RealmCount = "1">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Realm Section
#
# Name:
# The name of the realm.
# 
# Address:
# The address (and port) of that realm.
#
# Icon:
# The type of realm (PVP, Normal, RPPVP, RP)
#
# TimeZone:
# The location of the server (1=Development, 2=United States, 3=Oceanic, 4=Latin America, 
# 5=Tournament, 6=Korean, 8=English, 9=German, 10=French)
#
# Population:
# (0 = low, 1 = medium, 2 = high)
#
# Important information below
#
# change 127.0.0.1 to your EXTERNAL ip if you wish to have a PUBLIC server.
# This issues come up a lot!
#
# Timezone values :
# 0=Korean 16=China
# 1=Development 17=CN1
# 2=United States 18=CN2
# 3=Oceanic 19=CN3
# 4=Latin America 20=CN4
# 5=Tournament 21=CN5
# 6=Korean 22=CN6
# 8=English 23=CN7
# 9=German 24=CN8
# 10=French 25=Tournament
# 11=Spanish 26=Test Server
# 12=Russian 27=Tournament
# 13=Tournament 28=QA Server
# 14=Taiwan 29=CN9
# 15=Tournament 30=TestServer2
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#

<Realm1 Name = "Espada wow"
Address = "espada-wow.servegame.com:8129" 
Icon = "PVP"
Population = "1"
TimeZone = "8">

Here is my logonserver config

#######################################################################
# ArcEmu Realms Configuration File 
# Last updated at rev.1875
#######################################################################


# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#

<LogLevel Screen = "0"
File = "-1">

# Account Refresh Time
#
# This controls on which time interval accounts gets 
# refreshed. (In seconds)
# Default = 600 
# 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
# 
#

<Rates AccountRefresh = "600">

# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 3.0.9 was build 9551.
#

<Client MinBuild = "0000"
MaxBuild = "9999">

# WorldServer Setup
#
# RemotePassword
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
# AllowedIPs
# This section MUST be completed, otherwise all attempts to link your servers will fail.
# These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
# to make server connections to your logonserver, and register realms.
# For example, everything in the 127.0.0.* range would be:
# 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
#
# To allow a single IP,
# 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
#
# AllowedModIPs
# In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
# (adding bans, GMs, account permissions, etc)
#

<LogonServer RemotePassword = "change_me_logon"
AllowedIPs = "127.0.0.1/24"
AllowedModIPs = "127.0.0.1/24">

And here is my windows host file

# Copyright (c) 1993-1999 Microsoft Corporation
#
# Dette er en eksempel på en HOSTS-fil som brukes av Microsoft TCP/IP for Windows.
#
# Denne filen inneholder tilordninger av IP-adresser til vertsnavn. Alle
# oppføringer må være på hver sin linje. IP-adressen plasseres i den
# første kolonnen, etterfulgt av det tilsvarende vertsnavnet. IP-adressen
# og vertsnavnet må være adskilt av minst ett mellomrom.
#
# I tillegg kan kommentarer (som denne) settes inn på egne linjer, eller
# etter maskinnavnet, anført med et nummertegn ("#")
#
# Eksempel:
#
# 102.54.94.97 rhino.acme.com # kildeserver
# 38.25.63.10 x.acme.com # x-klientvert

127.0.0.1 espada-wow.servegame.com
192.168.1.1 espada-wow.servegame.com
213.184.219.67 espada-wow.servegame.com

127.0.0.1 is localhost.
192.168.1.1 is the router's IP.
213.184.219.67 is my external IP.

---

› See More: Stuckd at connecting, HELP

[StickyIcky]

<Client MinBuild = "0000"
MaxBuild = "9999">

to

<Client MinBuild = "0000"
MaxBuild = "99999">

If your using newest trunk of ArcEmu which supports 3.2

Cause i believe 3.2 is higher then 9999

EDIT: Yea, i was right, it's at 10314

[P1raten]

<Client MinBuild = "0000"
MaxBuild = "9999">

to

<Client MinBuild = "0000"
MaxBuild = "99999">

If your using newest trunk of ArcEmu which supports 3.2

Cause i believe 3.2 is higher then 9999

EDIT: Yea, i was right, it's at 10314

Yeah, that COULD be the problem... or:

# As of the last update, version 3.0.9 was build 9551.

that.

that implies that his core is 3.0.9.

Get a new server if WigSplitta's attempt doesnt work.

[LiLLeCarl]

add my msn [email protected]