Logon Server Down?

[vethen]

(I couldnt find the place to post questions, feel free to move. Sorry.)

I downloaded the 3.3.3a arcemu repack. Got online it was cool. Decided to make it public to play with friends and.... (through hamachi) they get stuck at the "connecting" screen then it says the logon server is down. Any ideas?

Here is my logon config (5.175.58.42 is my hamachi IP) :

/************************************************** *********************
* ArcEmu Logonserver Configuration File
* Last edited: 7/18/09
************************************************** *********************
* Configure the logonserver to connect to the accounts database below *
************************************************** *********************
* LogonDatabase.Host - The hostname that the database is located on
* LogonDatabase.Username - The username used for the mysql connection
* LogonDatabase.Password - The password used for the mysql connection
* LogonDatabase.Name - The database name
* LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
* LogonDatabase.Type - Client to use. 1 = MySQL
* Not supported: - 2 = PostgreSQL (Partly implemented)
* Not Supported: - 3 = SQLite (unimplemented)
************************************************** *********************/

<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "ascent"
Name = "logon"
Port = "3306"
Type = "1">


/* Host Directive
*
* This is the address that the realmlist will listen on.
* To listen on all addresses, set it to 0.0.0.0
* Default: 127.0.0.1 (localhost)
*
* Note: ISHost is the interserver communication listener.
*/

<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">

/* Server console logging level
*
* This directive controls how much output the server will
* display in it's console. Set to 0 for none.
* 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
* Default: 3
*/

<LogLevel Screen = "0"
File = "-1">

/* Account Refresh Time
*
* This controls on which time interval accounts gets
* refreshed. (In seconds)
* Default = 600
* 600 seconds = 10 minutes - 1 second = 0.0166666667 minutes 300 seconds = 5 minutes, 150 seconds = 2.5minutes
*
*/

<Rates AccountRefresh = "600">

/* Accepted Build Range Setup
*
* These two directives set up which clients will be
* allowed to authenticate with the realm list.
*
* Set these to the same builds that the server was
* compiled for.
*
* As of the last update, version 3.3.3 was build 11685, patch 3.3.3a is 11723.
*/

<Client MinBuild = "11685"
MaxBuild = "11723">

/* WorldServer Setup
*
* RemotePassword
* This directive controls the password used to authenticate with the worldserver.
* It must be the same between the two configs. If it is not, your server will
* not register.
*
* Default: "change_me_logon"
*
* AllowedIPs
* This section MUST be completed, otherwise all attempts to link your servers will fail.
* These "Allowed" fields are a space-seperated list of CIDR-form IP addresses that are allowed
* to make server connections to your logonserver, and register realms.
* For example, everything in the 127.0.0.* range would be:
* 127.0.0.0/24, as 24 of the bits must match the 127.0.0.0
*
* To allow a single IP,
* 1.3.3.7/32, would allow only 1.3.3.7 to connect as 32 of the bits must match.
*
* AllowedModIPs
* In the same form as AllowedIPs, these are the IPs that are allowed to modify the database
* (adding bans, GMs, account permissions, etc)
*/

<LogonServer RemotePassword = "ascent"
AllowedIPs = "5.175.58.42/24"
AllowedModIPs = "5.175.58.42/24">

Also I am running windows 7 64bit. I hear hamachi doesnt like it or something?

[Pedregon]

try making your listen host your hamachi ip

[vethen]

i believe i tried that before and it didnt work then i read somewhere to leave it 0.0.0.0

but i'll try it again. I've read alot of posts saying that widows 7 doesnt like hamachi, any word on that?

[Pedregon]

This should help you :]


For Windows 7: Start > Control Panel > Network and Sharing Center, then, on the left side panel, click on 'Change adapter settings'. Now press Alt, click on Advanced > Advanced Settings and put Hamachi at the top of the list.
3. Configure the gateway and metrics:
In Network Connections right click on Hamachi > Properties, select TCP/IP(v4) > Properties > Advanced. Ensure that the default gateway is 5.0.0.1, if not, then add/edit it and set its metric to Automatic (this is the Gateway Metric).
Below 'Default gateways' tick 'Automatic metric' (this is the Interface Metric).
Quick notice: Some users have reported that their internet connection fails when Hamachi is turned on. Removing the Hamachi gateway (5.0.0.1) should resolve the problem. It is not known why this is happening, but it might be the ISP's fault. Entering a Gateway Metric manually (for example, the default "1500") can restore the internet connection, but gaming functionality may still not be available.
4. If you're running Vista disable TCP/IPv6 (untick it in the Hamachi properties)
5. If you're running Vista ensure that Hamachi appears in the 'Network and Sharing Center' as a 'Private Network' .
If it doesn't, then press customize (at Hamachi, of course) and set it to 'Private Network'.
6. Reboot.
7. Create/Join a Hamachi network and check to see if you can ping/chat with one another. If either one of these don't work ensure you haven't forgotten anything and check again. Still not working? check section 3.1 and 3.2 of the 'Advanced Guide' below.
8. The game host must be running Vista when playing with XP users!

[vethen]

I tried all of that but the vista stuff, and it still doesnt work, I have my sister's computer next to me (we're both w7 shes 32bit im 64) and it just doesnt connect then says logon is down :( when i look at myself in her hamachi there is a yellow sign with a "!" in it. so there is some sort of connection problem? but im not too good with this stuff. We cannot ping eachother. Here is a link to a image of what i just changed, maybe i missed something?

http://i390.photobucket.com/albums/oo350/marbloro01/hamachi_problems.png

Here is what my sister sees my hamachi as:

hamachi_problem2.png picture by marbloro01 - Photobucket (http://s390.photobucket.com/albums/oo350/marbloro01/?action=view&current=hamachi_problem2.png)
(http://i390.photobucket.com/albums/oo350/marbloro01/hamachi_problems.png)

[hax0rz]

Try bringing down all your firewalls and running hamachi/arcemu as an administrator